|

Universal 115334 Motor

Brand: Universal| Model Number: 115334  | Product SKU: 14002 

Expert Help
$249.00 AVAILABILITY: Ships in 1-3 days

The 115334 motor is manufactured by Ametek Lamb Electric and was one of the most widely used prior to 2000, and is no longer used in current units.  This has a tangential discharge that allows the air to bypass the electrical components out through an exhaust horn, thereby extending the life of the motor.

Features of Universal115334 Motor

  • Construction Metal
  • Replacement Motor Type Tangential

Specifications of Universal115334 Motor

  • Air Watts 384
  • Amps 13
  • CFM 103
  • Diameter (In) 7.2
  • Stages 2
  • Volts 120
  • Water Lift (In) 110

Product Q/A of Universal115334 Motor


There are 2 Questions asked and 2 Answered

Questions and Answers for Universal115334 Motor


  • Q:

    How do I remove the motor ? Three bolts are loose but motor will not move.

    A:

    Over time, the motors can stick tight to the metal can becasue of a rubber gasket that has melted slightly.  The motor just need to be pulled up or pryed slightly to remove.

    Answered on: 10/31/2016 4:00:00 AM

  • Q:

    Are the ball bearings for the115334 motor available?

    A:

    We do not sell bearing for motors.  We have found that if the bearing have went bad, more then likely the armature and brushes and other motor parts are not good anymore.

    Answered on: 8/23/2020 4:00:00 AM

  • VacuMaid - P125
  • VacuMaid - P225 Use this motor if your unit is older than February 1999. This will require a relay and transformer.
  • Beam - 183
  • Beam - 284
  • Beam - 193
  • NuTone - 350
  • VacuMaid - P325 This unit requires two of this motor.
  • Vacuflo - 26
  • Vacuflo - 99
  • Hayden - 3600
  • VacuMaid - H1 Use this motor if your unit is newer than January 1994.
  • AstroVac - MKI Use this motor if your unit is newer than January 1994.
  • AstroVac - MKIII This unit requires two of this motor.
  • AstroVac - MKX
  • AstroVac - MKV Use this motor if your unit is older than February 1999. This will require a relay and transformer.
  • AirVac - VM110
  • AirVac - AV100
  • M&S - AV100
  • Filtex - SB300L The 120 volt version of this unit requires two of this motor.
  • Filtex - SB200L The 120 volt version of this unit requires two of this motor.
  • WalVac - 236
  • WalVac - 836
  • MD - M34 The 120 volt version of this unit requires this motor.
  • MD - B The 120 volt version of this unit requires this motor.
  • MD - E The 120 volt version of this unit requires this motor.
  • MD - SV The 120 volt version of this unit requires two of this motor and please check your current lamb number before ordering.
  • Dust Care - BE-1
  • Dust Care - BE-2
  • Singer - S200
  • Pullman-Holt - BIV105 Please double check the lamb number on your old motor before ordering.
  • Kenmore - 116.4043080 This motor may also be used, but you will need to visually compare to determine this.
  • Kenmore - 116.4043180 This motor may also be used, but you will need to visually compare to determine this.
  • Kenmore - 116.4043280 This motor may also be used, but you will need to visually compare to determine this.
  • Kenmore - 116.40400
  • Kenmore - 116.40510
  • Kenmore - 20-40520
  • Kenmore - 116.4052090
  • Kenmore - 116.40521
  • Kenmore - 116.4052190
  • Kenmore - 116.4052291
  • Kenmore - 116.40523
  • Kenmore - 116.40524
  • Kenmore - 116.40530
  • Kenmore - 116.40531
  • Kenmore - 116.4053180
  • Kenmore - 116.4053280
  • Kenmore - 116.4053380
  • Kenmore - 116.40540
  • Kenmore - 116.40590
  • Kenmore - 116500
  • Kenmore - 116501
  • Kenmore - 116504
  • Fasco - 851
  • VacuMaid - P90

Reviews of Universal115334 Motor

Posted By: on   2/4/2015 5:00:00 AM
no comments

Posted By: on   3/2/2015 5:00:00 AM
Easy to install and works like a charm. Thanks so much.

Posted By: on   9/14/2015 4:00:00 AM
We were lost without our Vac and now that she is up and running again with a new motor we couldn't be happier and the service we got was great. Thank you

Posted By: on   1/17/2016 5:00:00 AM
no comments

Please Wait ...